Air Wick Pure Freshmatic Auto Freshener Cherry Blossom 157g
Air Wick Pure Freshmatic Auto Freshener Cherry Blossom 157g
Couldn't load pickup availability
Product Details
Transport yourself with Air Wick Pure Cherry Blossom Automatic Spray Starter Kit. This auto spray air freshener will spread the scent of cherry blossom blooming across your home.
Have you tried our freshmatic air freshener range Air Wick Freshmatic Automatic Spray? Air Wick's automatic air freshener is programmed to automatically spray your home with delicate fragrance for a low maintenance air freshener which welcomes you home day after day. Each refill lasts up to 70 days** to deliver 24/7 freshness. The auto spray also has adjustable intensity, for when you'd like a more subtle, delicate aroma or burst of scent. With a selection of scents to choose from, each Air Wick Automatic Spray refill is compatible with our device to make swapping fragrances as easy and seamless as possible.
** based on lowest intensity setting (excludes boost button use)
Automatic spray for 24/7 freshness
Batteries and refill included with every device
Control the intensity by adjusting the frequency
Odour neutralisation
Directions
Directions for use
Read ALL information on this pack and follow instructions CAREFULLY before use. Use only as directed. Direct device spray nozzle away from your face at ALL TIMES and during set up procedure below.
Retain these instructions for future reference.
1. Lift the lid to open (diagram 1). Ensure the control knob is in the off position (single dot marking). To open, hold the base in one hand and the top with the other, twist anticlockwise and lift.
2. Insert the aerosol refill in the device base. Place the top half of the device on the base ensuring the refill spray nozzle is facing out through the opening at the front of the device (diagram 2). Rotate top of the device clockwise to "click" into closed position. When closed the lines on front and back of the device are aligned.
ALWAYS DIRECT DEVICE AWAY FROM FACE
3. Lift the lid open (diagram 3). Ensure the control knob is in the OFF position (single dot marking). Insert 1 AA batteries (diagram 3). Ensure the positive (+) and negative (-) terminals are aligned correctly.
4. Select desired fragrance intensity (diagram 4) using the control knob (low, medium, high line markings). Replace device lid by gently pushing it down into the closed position. When activated, the device will automatically spray after a delay of about 15 seconds. If there's no spray, switch off the device: a. Check that battery is inserted correctly. b. Check refill is inserted with spray nozzle facing out and device closed properly.
5. With device pointing away from face, place it in the desired position at a height of at least 2m from the floor level (diagram 5), facing away from the wall and polished/coated surfaces. If product comes in direct contact with polished or coated surfaces wipe immediately with a damp cloth.
NOTE: Change aerosol refill when fragrance is no longer emitted. Ensure the control knob inside the top lid (diagram 4) is in the OFF position (single dot marking), replace the refill (directions 1-4 above) and select your chosen fragrance intensity level.
